Investigate the impact of different types of additives on the performance of multifrade lubricating oil

Oct 13, 2025 by windailys.com 50 views

Analysis of Pressure on the Sliding Pads that Use Multi-Published Oil with and Without Additives with Variations of Rotation

Introduction

In the machining process, the use of cutting fluid is crucial to maintain the quality and efficiency of production. Wet machinery operations, where cutting liquid is channeled to the cutting area, is a general practice, especially in the turning process. For example, in turning operations, a minimum of 20 liters of cutting fluid is needed per minute to support the process of furious formation. The importance of the selection and use of lubricating oils, including multi-oil with and without additives, is in the spotlight in improving the performance of sliding bearings during the machining process.

The Role of Lubricating Oil in the Machining Process

Lubricating oil has a crucial role in reducing friction between moving surfaces, thereby extending the life of the tool and improving the quality of the final product. The use of multi-published oil, which has different viscosity at different temperatures, allows more efficient lubrication. Under certain conditions, the addition of additives to lubricating oil can increase lubricating performance, such as reducing corrosion and improving lubrication properties. The addition of additives can also improve the thermal stability of the lubricant, reducing the risk of degradation and oxidation. This is particularly important in high-temperature machining operations, where the lubricant can break down and lose its effectiveness.

Pressure Analysis on the Slide Cushion

The pressure that occurs on the sliding cushion is strongly influenced by the variations of the rotation and the type of lubricant used. With a rotation variation, the centrifugal force can increase the pressure on the bearing, which has a direct impact on the wear and performance of the sliding bearings. Therefore, it is essential to analyze how this pressure changes with different use of lubricating oil. Research shows that multifrade lubricating oil with additives can reduce friction and increase cushion capacity to withstand loads. The use of multifrade lubricating oil with additives can also improve the surface finish of the workpiece, reducing the risk of scratches and other defects.

Comparison with and without Additives

When comparing the effects of using multi-oil lubricating oil with additives versus without additives, the results of the analysis show that oil with additives provides better performance. This can be seen from the reduction in the pressure that occurs on the sliding cushion, which shows that the lubrication is more optimal. Oil without additives tends to produce more friction, which in turn causes an increase in pressure and risk of damage faster. The use of oil without additives can also lead to the formation of deposits and varnish, which can further increase the friction and wear on the sliding bearings.

The Impact of Rotation Variations on Pressure

The rotation variations can also affect the pressure on the sliding cushion. As the rotation speed increases, the centrifugal force can increase the pressure on the bearing, which can lead to increased wear and friction. The use of multifrade lubricating oil with additives can help to reduce the impact of rotation variations on pressure, improving the performance and lifespan of the sliding bearings.

Conclusion

The selection of proper lubricating oil, especially in the context of wet machining operations, is very influential on the performance of the sliding cushion. Multifrade lubricating oil, especially those containing additives, is proven to be more effective in reducing the pressure on the sliding pads during different rotation variations. Further research is needed to explore different types of additives and their impact on the efficiency of the machining process, in order to optimize production results and extend the life of the tool.

Recommendations for Future Research

Based on the results of this analysis, the following recommendations are made for future research:

Investigate the impact of different types of additives on the performance of multifrade lubricating oil
Explore the use of multifrade lubricating oil with additives in different machining operations, such as milling and drilling
Develop new lubricating oils that are specifically designed for use in wet machining operations
Investigate the impact of rotation variations on the performance of sliding bearings in different machining operations

Conclusion

In conclusion, the analysis of pressure on the sliding pads that use multi-published oil with and without additives with variations of rotation has shown that multifrade lubricating oil with additives is more effective in reducing the pressure on the sliding pads during different rotation variations. The use of multifrade lubricating oil with additives can improve the performance and lifespan of the sliding bearings, reducing the risk of wear and friction. Further research is needed to explore different types of additives and their impact on the efficiency of the machining process, in order to optimize production results and extend the life of the tool.
Frequently Asked Questions (FAQs) about Analysis of Pressure on the Sliding Pads that Use Multi-Published Oil with and Without Additives with Variations of Rotation

Q: What is the importance of selecting the right lubricating oil for machining operations?

A: The selection of the right lubricating oil is crucial for machining operations as it can affect the performance and lifespan of the sliding bearings, as well as the quality of the final product.

Q: What is the difference between multifrade lubricating oil with and without additives?

A: Multifrade lubricating oil with additives has different viscosity at different temperatures, allowing for more efficient lubrication. The addition of additives can also improve lubricating performance, such as reducing corrosion and improving lubrication properties.

Q: How does rotation variation affect the pressure on the sliding cushion?

A: Rotation variation can increase the pressure on the bearing, which can lead to increased wear and friction. The use of multifrade lubricating oil with additives can help to reduce the impact of rotation variations on pressure.

Q: What are the benefits of using multifrade lubricating oil with additives in machining operations?

A: The use of multifrade lubricating oil with additives can improve the performance and lifespan of the sliding bearings, reduce the risk of wear and friction, and improve the surface finish of the workpiece.

Q: Can the use of multifrade lubricating oil with additives lead to the formation of deposits and varnish?

A: No, the use of multifrade lubricating oil with additives is designed to prevent the formation of deposits and varnish, which can further increase the friction and wear on the sliding bearings.

Q: What are the recommendations for future research in this area?

A: The following recommendations are made for future research:

Investigate the impact of different types of additives on the performance of multifrade lubricating oil
Explore the use of multifrade lubricating oil with additives in different machining operations, such as milling and drilling
Develop new lubricating oils that are specifically designed for use in wet machining operations
Investigate the impact of rotation variations on the performance of sliding bearings in different machining operations

Q: What are the implications of this research for industry and manufacturing?

A: The findings of this research have significant implications for industry and manufacturing, as they highlight the importance of selecting the right lubricating oil for machining operations. The use of multifrade lubricating oil with additives can improve the performance and lifespan of the sliding bearings, reduce the risk of wear and friction, and improve the surface finish of the workpiece.

Q: What are the potential applications of this research?

A: The findings of this research have potential applications in various industries, including:

Aerospace and defense
Automotive
Energy and power generation
Medical devices and equipment
Oil and gas

Q: What are the limitations of this research?

A: The limitations of this research include:

The study was conducted in a laboratory setting, and further research is needed to validate the findings in real-world applications.
The study focused on the use of multifrade lubricating oil with additives in machining operations, and further research is needed to explore the use of other lubricating oils and additives.

Q: What are the future directions for this research?

A: The future directions for this research include:

Investigating the impact of different types of additives on the performance of multifrade lubricating oil
Exploring the use of multifrade lubricating oil with additives in different machining operations, such as milling and drilling
Developing new lubricating oils that are specifically designed for use in wet machining operations
Investigating the impact of rotation variations on the performance of sliding bearings in different machining operations.